World-top Highlight Traceless injection molding technology :

With the development of science and technology and the improvement of living standard, consumer can focus on the appreciation the aesthetics of products including the quality of the external surface. In traditional injection molding processing, people always lower the temperature in order to reduce the warp & sink mark and cut down the molding cycle. However, when this is done, it is easy to produce the weld mark, bank mark, cloudiness, rough surface, etc. On the other hand, if one raises the temperature, it could improve the exterior quality of the surface of the products, but it can also easily lead to the weld mark bank mark, wrong size, etc. Additionally, the molding cycle times will be extended and the cost will be higher. Since a special heat-speed temperature-controlled cooling rate device is used in the High-gloss & Traceless injection molding technology, it can solve all the issues presented by either of the above methods.

Compiling a team of highly qualified professional technicians, our company researched & developed the High-gloss & Traceless injection molding technology which can eliminate the Melting wiring, weld mark, corrugation, and silver marks which appear on the surface of products. It can also completely solve the surface of plastic shrinkage phenomenon, and achieve a mirror surface finish level. It almost completely reproduces the mold surface condition to achieve a traceless result. The Products do not need to spray or follow-up processing. This can reduce the costs greatly, shorten delivery time and avoid the environmental problems caused by spray paint. In addition, High-gloss & Traceless injection molding technology can eliminate the floating fibers phenomenon which is caused by the fiber products, so that it makes a more perfect quality product. In parenchyma Molding processing, injecting molten resin at high temperatures induces the liquidity of injection and reduces the injection pressure. This can avoid the Misrun and Gas Trap Effect, etc. It can greatly improve the quality and strength of the product. Moreover, rapid cooling after molding can reduce the shrinkage stress and makes the demoulding easier. It also can reduce the cycle of thick-walled injection molding to 60-70% at the same time.

As this is our self-developed technology, we own the independent intellectual property rights and it has been improved with a high degree of success through a large number of practical trials. In this field, we have a strong advantage in our state of the art technology and can offer very competitive pricing for our products. Therefore, we are the best option for you!